Solution

• SSD cooling

  Usually, when we read and write a lot of data or carry out continuous high load computing, the SSD temperature of the host will generally be controlled at about 60 ° C, and the hot weather in summer will occasionally reach 65 ° C, which is much lower than the CPU temperature, but the damage to the performance and life of the SSD is irreversible, and it may also drag down the performance of the whole machine. Therefore, the installation of heat sinks for SSDS can not only reduce the hardware temperature, but also further improve the stability and reliability of the system.

  More+

• CPU cooling

  The CPU will generate a lot of heat when it is working. If the heat is not dissipated in time, the CPU may crash or burn down. The CPUradiator is used for SSD cooling. radiator is crucial to the stable operation of your CPU, so it's important to buy a good radiator when you assemble your computer.

  More+

• chassis cooling

  When the host computer is running, the CPU, GPU and other components will generate a lot of heat. If the heat is not dissipated in time, the computer will crash and crash. Therefore, the small fan in the computer host can expel the hot air, so as to keep the temperature inside the computer host in a low range. In some high-performance computers, there are also multiple fans to enhance heat dissipation.

  More+

• Laptop cooling

  thermal pad can effectively improve the stability and life of the equipment, and requires the cooling fan to have the characteristics of low noise, waterproof, anti-interference and anti-static, so that the equipment can work normally without any interference

  More+

• computer power

  Computer power supply is a kind of enclosed independent component installed in the main box, its role is to convert alternating current to +5V, -5V, +12V, -12V, +3.3V, -3.3V and other different voltage, stable and reliable direct current, It is used for the system board in the main box, various adapters and expansion cards, hard disk drives, optical disk drives and other system components as well as keyboards and mice.

  More+

• thermal grease

  Thermal conductive silicone grease is commonly known as heat sink paste, thermal conductive silicone grease with silicone as the main raw material, add heat resistance, excellent thermal conductivity materials, made of thermal conductive silicone grease complex, used for power amplifier, transistor, tube, CPU and other electronic components of heat conduction and heat dissipation, so as to ensure the electrical performance of electronic instruments, instruments and other stable.

  More+

• thermal pad

  Thermal pad is a high-performance gap-filled thermal conductivity material, mainly used for the transfer interface between electronic equipment and heat sink or product housing. It has good viscosity, flexibility, good compression properties and excellent thermal conductivity. The air between the electronic element and the heat sink can be completely discharged in use to achieve full contact. The heat dissipation effect is significantly increased.

  More+

• fan controller

  This device is to install a temperature sensor in the chassis, and the temperature control switch can control the speed of the fan according to the temperature, so that the speed of the fan is reduced at low temperature to reduce noise, and the speed is accelerated to strengthen the cooling effect when the temperature rises. This is conducive to extending the service life of the fan and reducing the noise of the fan. If your chassis fan is not connected to the motherboard intelligent speed control interface, the chassis fan has been running at high speed, this controller to assist the chassis fan to automatically adjust the speed, effectively reduce the noise of the fan, and extend the life of the fan.

  More+